English简体版繁體版Home

Product Name : AC charging cart

Model : JF-SEME32‐S

Q'ty :

User Manual
32 Port Multi-Function Trolley
 proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F01.jpg  proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F02.jpg

1. Introduction
       32 port multi‐function trolley is a central unit that can recharge tablets,
     notebooks and Chromebook of any brands and offer a safe and convenient solution to recharging and storing batteries.

     32 port multi‐function trolley is equipped with multiple AC power on mode power start mode,
     which can prevent the strong current from causing any damage to devices, installation or the power supply system of users.

     As an export in charging system, an intelligent electric fan is designed in the charger.
     When the power supply efficiency reaches the standard of heat elimination, the heat elimination fan will start,
     which makes the 32 port multi‐function trolley stay quiet after charging. Thus,
     the unit will not make noise and at the same time prolong the life of the heat elimination fan!

     Without this charging system, tablets, notebooks and Chromebook have to be individually connect to the wall socket,
     which occupies the space and offend theeye. However, with 32 port multi‐function trolley,
     you can easily recharge the batteries of the devices and efficiently manage the power, which considerably save the labor cost.


2. Safety Information
     Please read, understand, and follow all the safety information contained in this guide prior to using our product.

    Indoor Use
    This product is intended for indoor use plugging into the standard 100~240VAC,
    50/60Hz power outlet. Any misuses could damage the product and/or create unsafe operating conditions.

    Location
    Select a location where the airflow is not obstructed.
    Place the product on a flat, level surface at least two feet from any heat source,
    such as ranges or heater. Keep all liquids away from the product.

    Electrical
    Plug the product into a grounded, polarize electrical outlet. Do not alter the ground plug or polarized plug blades.
    Do not overload the AC power. Each socket should not exceed 80% of the power rating

    Cleaning
    Turn the product off and unplug it before cleaning.Use only a dry, soft cloth to wipe the outside of the product.


3. Package Content
   
Please check package content before starting the installation. If any component is missing or defective,
    please contact your local distributor.

     1 x 32 Port Multi‐function trolley
     1 x Power Cord
     1 x User Guide 1
     1 x key for front and back door

4. Panel Information
    The front panel of the 32 port multi‐function trolley can provide basic understanding of the indications and
    function of the unit.
    Please refer to below content when
operating or greater clarification on its usage.
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F07.jpg 
A. Circuit Breaker Alarming (red)
    Every time turn on the power, the 32 port multi‐function trolley will check the power supply status by itself
    and follow the sequence of 6>>>5>>>4>>>3>>>2>>>1 to start power supply. So when you turn on the power,
    in the beginning, there will be 6 red light. Then the red light will extinguish from right to left. This is a 
standard
    phenomenon when starting the device.

If the start process is completed, there is other light lamflicker:
     1 – The first circuit breaker Alarming is activated
     2 ‐ The second circuit breaker Alarming is activated
     3 ‐ The third circuit breaker Alarming is activated
     4 ‐ The fourth circuit breaker Alarming is activated
     5 ‐ The fifth circuit breaker Alarming is activated
     6 ‐ The sixth circuit breaker Alarming is activate

B. The indicator of starting the heat elimination fan (Green)
    When the power supply efficiency of the 32 port multi‐function trolley reaches the standard that has to eliminate 
    the heat, the system will automatically light the heat elimination fan’s indicator and start the heat elimination fan,
    which is on the back of the trolley.

    a. The indicator of starting the heat elimination fan (on top and down)

C. General power indicator (Green)

 

5. Manual Operation
This part explains the daily operation of 32 port multi‐function
Front View
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F08.jpg
A. The front panel of power control box. For more information, please refer to 4. Panel Information.
B. Handle
C. Door Knob,After pull the door knob, cling the door knob and turn anti‐clockwise and you can open the door.
1. Insert the key proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F09.jpg 2. Pull the door knob proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F10.jpg
3. Turn anti‐clockwise proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F11.jpg 4. Pull and open the door proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F12.jpg
D. Partition for notebooks
Gently lift the partition, and then you can take it away, which allows you freely use the space inside the trolley.
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F13.jpg
E. Castor Wheels
There are 4 castor wheels in 32 port multi‐function trolley . The 4 castor wheels all can stop.
If you step on the wheel brakes, the wheels can be locked.
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F14.jpg



(Side View) (handle side)

proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F15.jpg
A. General Power Input hole and on/off
B. Outside Power output Socket
C. Cable Management Kit

Open the Back Door
After unlock the back door, simultaneously press pressing buckle. Then you can open and take away the back door.
So you can see the inside of the trolley.

※The power cord of the heat elimination fan is connected to the back door. So when you open the back door,
please don’t exert. Otherwise, the electric wire of the heat elimination fan will be pull apart.
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F16.jpg


Back View‐Open
proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F17.jpg

A. Automatic sequential AC socket power on /off (6 ports)
    The plug of the extension cord should connect to one of the 6 ports.When the power is turned on, the socket will
    be turned on in sequence to avoid the danger from too big current, protecting the safety of users.
    ※It is forbidden to plug high power consumption unit, such as refrigerator or microwave.
B. Extension Cord
    Please insert the plug of the transformer of the notebooks or Chromebook to B.
    Before inserting, please turn on the power.

C. The placing space of the notebooks or Chromebook.
D. The hole for charging cable

6. Specification

Model No. JF-SEME32‐S 
Connectors 1 x IEC C14 Male (on or off) 
1 x IEC 5‐15R Socket (Outside Power Source) 
6 x Intelligent Alternating Current Power Socket 
1 x RJ45 connector 
Displays 6 x Red LED (Power Overload Indicator) 
3 x Green LED light
 (2 x The Indicator of Activating the Elimination Fan + 1 x
General Power Indicator)
Switches or Buttons 1 x Power 
Heat Elimination 2 x 120*120*25mm Heat Elimination 
Operating Temperature 0 ~ 50°C 
Storage Temperature ‐20 ~ 60°C 
Power AC 220V~240V, 50/60Hz;Biggest Input Current:7.5A
AC 100V~120V, 50/60Hz;Largest Input Current:15A 
Charging Type Power Socket(Including Power Overload and Short Power
Protection) 
Weight 47 Kgs 
Storage Dimension 30 x 430 x 300 mm (W x D x H) 
Dimension (W x D x H) 670 x 585 x 900 mm (Excluding Handle and Wheels) 


7. Technical Support
Please contact your local dealer for technical support issue.

8. DISCLAIMER

Information in this document is subject to change without notice. The manufacturer does not make any representations or
warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable
for any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or
other damages.

9. FCC/CE STATEMENT
This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and;
if not installed and used in accordance with User Guide, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case, the user will be
require to correct the interference at his/her expense.

proimages/Smart_USB_charger_and_Sync_station/AC_charging_cart/JF_SEME32_S_F18.jpg

AC charging cart DM