Product Features
- Through the battery valve or chip to control the battery valve on and off, it can also control the closing of the mechanical switch. It is a high-tech electronic product that completes the opening and locking tasks.
- It is an electronic lock with anti-theft warning function.
- It can be applied to any cabinet indoors or outdoors, and its protection level also reaches IP65.
- The handle of this electronic lock is equipped with a mechanical opening lockcore. The internal pentagon screwdriver and mechanical key in the standardequipment are used for opening. In case of occasional power failure, the user is required to open the lock urgently to avoid unexpected accidents.
Product image ( JFMS-899-1 Electronic locks )
Specification
| Item |
Description |
Spec / Parameter |
| 2.1 |
Item No. |
JFMS-899-1 |
| 2.2 |
Exterior size |
see7.0 |
| 2.3 |
Rated voltage |
DC 12V |
| 2.4 |
Operating voltage |
DC12V±20% |
| 2.5 |
Power consumption |
3.6W |
1) At 25 ℃,65% RH
2) Rated Voltage
|
| 2.6 |
Rated current |
≤ 0.25A |
| 2.7 |
IP protection |
IP65
|
| 2.8 |
Weight |
0.72 kg |
Main materials /part spec
| Item |
Description |
Material |
| 3.1 |
Pedestal |
Zinc alloy |
| 3.2 |
handle |
Zinc alloy |
| 3.3 |
Steel bolt |
SUS304 |
| 3.4 |
Power box |
ABS |
Environment parameter
| Item |
Parameter |
Condition |
| 4.1 |
work environment |
Temperature : -40 ~ +65℃
Humidity : 5 ~ 90% |
| 4.2 |
Storage environment |
Temperature : -40 ~ +80
Humidity : 0 ~ 90% |
| 4.3 |
Altitude |
海拔 : -60m~4000m |
| 4.4 |
Warranty period for electronic components |
1 years @ 25℃/ 85% Relative humidity (RH) |
| 4.5 |
Warranty period of mechanism parts
|
1 years @ 25℃/ 85% Relative humidity (RH) |
| 4.6 |
Packaging vibration resistance test
|
After packaging, apply 1.1G acceleration in three directions of XYZ , and there is no abnormality after 30 minutes of vibration . |
| 4.7 |
Packaging impact resistance test
|
After packing, it is 60 cm high, with 1 corner, 3 sides and 6 sides falling naturally without serious damage |
Operating Instructions：
♦ After the controller energizes the control line of the electronic lock, the indicator light flashes on the handle (green light) ; suggestion: control set the power-on time to no more than 25 seconds to save power. Press the hands- handle circled position below the handle, automatically pops up, (if not pressed, the green light keeps flashing and waiting to be turned on until the control line is powered off).
♦ Rotating the handle, drives the steel bolt , even rod or the like latch closing operation mechanism opening motion is completed.
♦ When the machine is opened, first press the handle to the end (inward) and then turn the key.
Installation schematic :
Dimension :
Pin assignment :
Definition of lead wire harness:
| Pin number |
Color |
Specifications / Definition |
Cable |
| 1 |
Red |
12V+ |
UL2464 / 26AWG
|
| 2 |
Black |
GND |
| 3 |
White |
Lock switch status output signal line |
| 4 |
Yellow |
Lock switch status output signal line |
Precautions：
♦ Do not exceed the limit specified in this specification during use.
♦ If you want to change any specifications of this file, please make sure to request in advance.
♦ Do not wrap the power cord around the lock or pull the power cord forcibly, as the power cord will be damaged and cause function Failure.
♦ If any information and files are different from this copy, this copy will be used as the main reference.
♦ Do not use in flammable gas and any harmful environment.
♦ When the electronic lock is dropped on the ground during transportation or installation, the lock will be damaged.
♦ The torque of the screw of the lock housing shall not exceed 3N.m, and the torque of the handle shall not exceed 30N.m.
♦ During the installation of the door lock on the door, the door lock must not be knocked to avoid damage to the door lock parts. The installer must wear it Gloves.
♦ The door panel must be kept level during installation, and the fixing hole of the door should be opposite to the shape of the lock.
♦ Do not strike the lock body with gravity, or wipe the surface of the lock body with chemicals to prevent corrosion of the plating layer.
♦ After installation, the lock body maintains flatness and verticality, and there is no need to apply waterproof glue at the installation interface of the door lock and door panel The edge can reach the IP55 waterproof level.
Control system schematic：
Product application：
JFMS-899-1 Electronic locks
Electronic locks can be used for data center cabinets and Industrial cabinets provide efficient electronic access security protection.
- Can be used independently or in series, with traditional mechanical lock.
- Compared with the results, electronic locks have higher protection and security.
- Significantly improve technology and performance.
Product number：JFMS-899-1
Electronic locks DM
Download
